Any leveling of the floor must be done prior to the installation of the channel body. Choose from eight high-quality textured coatings in delicate colour gradations. The adaptor kits include a stainless steel adaptor ring with an over-molded rubber gasket and a variety of perforated hole patterns that align with most common clamping ring shower drains. The standard grate assembly frame features a 3/8" (10 mm) wide reveal after installation and can be combined with one of two grate options:SOLID (A) or SQUARE (B). 3. It ensures a simple and secure connection to the bonded waterproofing assembly, both in the floor area and on adjacent walls. 3. The profiles only have a single purpose to channel the water where it belongs. Install your drains end-to-end by connecting them with the KERDI-LINE-FC, Contact us: 888-472-4588 The drain set comprises a rotatable drain body and a drain adapter. As the name implies, Schlter-KERDI-LINE-VARIO WAVE is a W shaped drainage profile for use with the Schlter-KERDI-LINE-VARIO-H drain. Apply Schluter SET, Schluter ALL-SET, Schluter FAST-SET, or unmodified thin-set mortar to the substrate and install the tiles, ensuring full coverage. The Schluter KERDI LINE G3 Linear Drain is designed to be used with the Schluter pre-formed sloped linear shower trays Schluter KERDI SHOWER LT/LTS Shower Trays. You can also adjust the profile installation height to the thickness of the floor covering by using tile adhesive. Order before 2pm for next day delivery (on stock items). KERDI-LINE is available in channel lengths from 20" to 72" (50 cm to 180 cm) in 4" (10 cm) increments. Regular cleaning maintains the neat appearance of stainless steel and reduces the risk of corrosion. The floor can be sloped on a single plane to KERDI-LINE, which enables the use of largeformat tiles and creates interesting design opportunities. The channel body is offered with either a center or offset outlet to provide flexibility when obstacles such as floor joists are encountered during installation. Also, the tileable grate and the 6" round or square grates are not compatible with the 5 adaptor ring flange. Tlz6leJx>q. Apply Schluter SET, Schluter ALL-SET, Schluter FAST-SET, or unmodified thin-set mortar to the underside of the grate frame and place it in the channel body ensuring full coverage and support of the frame. From that perspective, KERDI-LINE-VARIO is destined to become a classic. The profile can also be cut to size at both ends and has a length of 120 cm. hb```b````g`4ab@ !V(G&$xL*rw,tZf.-2*C[[aSb pLuE} With their high-design appeal, linear drains make a statement in the shower, but they also have a functional side. However, in cases where the configuration of the shower does not allow for the use of the tray, KERDI-LINE can also be used in conjunction with a mortar base. Slope the mortar bed using the bonding flange and mortar screeds as guides. It ensures a simple and secure connection to the bonded waterproofing assembly, both in the floor area and on adjacent walls. Note: KERDI-FIX or other adhesives that are compatible with EPS foam can be used to install the channel support and channel body as an alternative to thin-set mortar. The Schluter KERDI-LINE is a low profile linear floor drain specifically designed for bonded waterproofing assemblies. The wall shelf in elegant STYLE design offers a practical storage surface whatever tiles are to be installed or already exist. a. KERDI: Apply Schluter SET, Schluter ALL-SET, Schluter FAST-SET, or unmodified thin-set mortar to the mortar bed surrounding KERDI-LINE with a 1/4" x 3/16" (6 x 5 mm) V-notched trowel or the KERDI-TROWEL, which features a 1/8" x 1/8" (3 x 3 mm) square-notched design. Each standard assembly is available in a brushed or chrome finish. The covering support is placed flush with the top of the bonding flange and can therefore accommodate any thickness tile covering. Bonded waterproofing and vapor-retardant membrane. The trays are available for wall (-LS) or center (-L) drain placement. KERDI-LINE includes a corresponding polystyrene foam channel support to set the drain elevation to the corresponding KERDI-SHOWER-LT/-LTS shower trays. Apply Schluter SET, Schluter ALL-SET, Schluter FAST-SET, or unmodified thin-set mortar to the membrane surrounding KERDILINE with a 1/4" x 3/16" (6 x 5 mm) V-notched trowel or the KERDI-TROWEL, which features a 1/8" x 1/8" (3 x 3 mm) square-notched design. Please note, the different outlet variants are only available in a certain range of channel lengths: The Schluter KERDI LINE G3 Linear Drain can be combined with the KERDI LINE Standard, KERDI LINE STYLE Contour Grate/Frame Sets and the KERDI LINE DG3frameless tile cover support, which are purchased separately. Schluter-KERDI-DRAIN is a floor drain specifically designed to allow connections to Schluter-KERDI or other load-bearing, bonded waterproof membranes. Find some existing tutorials and project documentation videos to learn how-to get the best out of our products - for more fun in your life, start now! As such, it eliminates the time and labor involved in building a sloped mortar bed. For installation of a shower tray, depending on the installed drain elevation, it may be necessary to install a polystyrene foam panel, backerboard, etc. The 2000 x 1360 x 39mm LTS Tray is designed specifically for use with the Schluter KERDI LINE G3 Linear Drain it is a low-height tray that simplifies creation of a level access shower area on timber joist substrates. Continuing Education for Architects & Designers. Click here to view this product on the Manufacturers website. Apply a continuous 1/4" - 3/8" (6 - 10 mm) bead of KERDI-FIX to the underside of the adaptor ring. We are the leading online tools supplier for your tile, stone or concrete applications. Our Schlter-TRENDLINE colour series is sure to include the perfect profile to match current colour styles. The KERDI-SHOWER-LT/-LTS shower trays are available in 39 x 39 (100 cm x 100 cm), 48 x 48 (122 cm x 122 cm), 55 x 55 (140 cm x 140 cm), 36 x 72 (91 cm x 183 cm), and 38 x 76 (97 cm x 193 cm). Simply enter the dimensions of your new shower and select the profile design. Linear drainage for versatile installation. TheKERDI-LINE Grate Assembly is sold separately and is required for a finished installation. Since it is made of inorganic materials, KERDI will not promote mold growth within the system. Apply a generous bead of KERDI-FIX to the top and bottom of the channel support. It ensures a simple and secure connection to the bonded waterproofing assembly, both in the floor area and on adjacent walls. 2. It ensures a simple and secure connection to the bonded waterproofing assembly, both in the floor area and on adjacent walls. The simple connection to standard drain outlets makes KERDI-LINE suitable for new construction and renovation. The style grate assembly frame features a minimal reveal after installation and can be combined with one of three grate options: FLORAL (E), CURVE (F), or PURE (G). These shower trays are pre-sloped so water is funneled directly to the drainage. It features a standard 2" (50 mm) no-hub outlet that is simple to connect to the waste line, and is offered in center and offset versions, providing flexibility when obstacles (e.g., floor joists) are encountered during installation. The channel body features a standard 2" (50 mm) no-hub outlet and is attached to the pipe using an appropriate mechanical no-hub coupling. Please note: This drain is not compatible with the KERDI LINE Standard C Design or the KERDI LINE D Frameless Cover Support. KERDI-LINE is connected to the waste line with the appropriate mechanical no-hub coupling in accordance with the coupling manufacturers instructions.Channel body installation Access to plumbing from below When there is access to the plumbing from below and the waste line can be connected after installing KERDI-LINE, the channel body may be set without making a connection to the waste line simultaneously. This product is already in quote request list. Apply Schluter SET, Schluter ALL-SET, Schluter FAST-SET, or unmodified thin-set mortar to the substrate where the drain is to be placed with a notched trowel. Refer to local plumbing and/or building codes for any specific requirements in your area. How far from the wall is the KERDI-LINE linear drain installed? The use of KERDI-FIX limits the ability to level KERDI-LINE. 1. The KERDI-SHOWER-LT/-LTS shower trays are made of lightweight, expanded polystyrene with integrated waterproofing via the KERDI membrane laminated on the surface, and a perfect slope so water is funneled directly to the drainage. Insert the foam spacers in the grate frame to reinforce it during the remainder of the installation. There are two drain placement options available for the shower tray: center or wall-adjacent, as seen in this image. Do not use abrasive or alkaline cleaning agents. Together with our precisely fitting design profiles, you can create flexible linear drainage in floor level showers with unobtrusive drainage channels. Waterproofing remains the cornerstone of your showers durability. KERDI-LINE can be installed adjacent to walls or at intermediate locations in showers, wet rooms, and other applications that require waterproofing and drainage. 900mm linear wetroom rectangular offset waste outlet shower 1600mm 90mm substrate 30mm 600mm tray former 1800mm javascript unavailable 0 The installation instructions below represent the use of Schluter-KERDI-LINE in floor applications. Discover the next generation of linear drainage: Schlter-KERDI-LINE-VARIO combines the efficiency of KERDI drainage technology with elegant profiles in Schlter designs. The universal linear drainage system KERDI-LINE-VARIO can be installed in an intermediate position or against a wall. Find some existing tutorials and project documentation videos to learn how-to get the best out of our products - for more fun in your life, start now! This length value refers to the internal size of the channel trap the external length of the body is 50mm more for each size, due to the 25mm flange that runs round the entire top edge of the channel body. Quality product shipped quickly and had no defects or issues. Please note: Grate assemblies included with the plastic KERDI-DRAIN featuring 3" (75 mm) outlets and the residential adaptor kits only allow vertical and tilt adjustment (no lateral adjustment). Embed KERDI in the bond coat with the flat side of the trowel to ensure full coverage and remove air pockets b. DITRA: Apply Schluter SET, Schluter ALL-SET, Schluter FAST-SET, or unmodified thin-set mortar to the mortar bed surrounding KERDI-LINE with a 1/4" x 3/16" (6 x 5 mm) V-notched trowel or the DITRA-TROWEL, which features an 11/64" x 11/64" (4.5 x 4.5 mm) square-notched design. Many classic designs owe their success to the concept of "Less is more". Connection to waterproofing membranes The KERDI or DITRA waterproofing membranes can be installed as soon as the mortar bed can be walked upon. Prepare the cut section of pipe and odor trap with cleaner, primer and ABS or PVC cement per the solvent cement manufacturers instructions.4. Schluter-KERDI-LINE is a low profile linear floor drain specifically designed for bonded waterproofing assemblies. 1. It can be universally used for intermediate installation in floor or at wall areas. The opening of this profile is elegantly concealed by a removable cover panel. This connection is made watertight via the rubber gasket and Schluter-KERDI-FIX adhesive/sealant. Send us an email: , Using a Prefabricated Shower Tray and Ramp. The KERDI-LINE channel body is made of formed stainless steel and features a bonding flange laminated with a collar made of KERDI waterproofing membrane. For the best experience on our site, be sure to turn on Javascript in your browser. Continuing Education for Architects & Designers. h=KQy"L@"B"?"846EC{HkSQC"J-b_MZ~\RM&eD]-LL/q WbI.4dr'*AO|Wo>neW2U!_{YnHL#aANqk oZvnMw)?VAsH 2 As such, it eliminates the time and labor involved in building a sloped mortar bed. Clean the grates and profiles using common household cleaning agents. The drain adapter with integrated Schlter-KERDI-FLEX collar comes fully inserted into the sealed wave shaped drain and is secured with a clamping ring. Begin the drain installation by dry fitting the components. KERDI-DRAIN consists of a drain casing and fully adjustable grate assembly or covering support to which tile is applied. The elevation should be set such that the frame will be flush with the surface of the tile covering. Bromham KERDI-LINE requires no special maintenance and is resistant to mold and fungi. The TILE grate is a frameless tileable covering support that seamlessly blends in with the surrounding tiles. It ensures a simple and secure connection to the bonded waterproofing assembly, both in the floor area and on adjacent walls. The channel body features a standard 2" (50 mm) no-hub outlet and is attached to the pipe using an appropriate mechanical no-hub coupling. Note: The tape on the grate frame does not need to be removed. The Schluter KERDI-LINE Channel Body DrainFeatures: KERDI-LINE consists of a formed stainless steel channel body and grate assembly (must be purchased separately) or covering support to which tile is applied. KERDI, DITRA, OR DITRA-XL is installed up to the outer edge of the KERDI-LINE bonding flange using Schluter SET, Schluter ALL-SET, Schluter FAST-SET, or unmodified thin-set mortar. The spacers may be adjusted simply by turning the bolts by hand. Slope the mortar bed using the bonding flange and mortar screeds as guides. Learn more about the simplicity, versatility and elegance of Schlter-KERDI-LINE-VARIO in floor level showers: Schlter-SHELF is a stylish addition to showers and much more. shower schluter drain kerdi kit center pan inch offset sizes 32x60 systems contains Drain grates are available in stainless steel with a polished or oil-rubbed bronze finish and in anodized aluminum with a brushed copper, brushed brass, or brushed nickel finish. The covering support is placed flush with the top of the channel body and can therefore accommodate any thickness tile covering. The KERDI-LINE channel body is made of formed stainless steel with a standard 2" (50 mm) no-hub outlet for a simple connection to the waste line. Get early access to deals and special offers. Are you planning to build a floor level shower with linear drainage, but aren't sure of the material quantities you will need? Installation instructions for the use of KERDI-DRAIN-A in shower applications can be found in the Schluter-Shower System Installation Handbook. The cove-shaped design creates linear drainage in floor level showers with an especially slim and unobtrusive drainage profile. KERDI is a pliable, sheet-applied polyethylene waterproofing membrane and vapor retarder, designed to prevent moisture from penetrating the solid backing and preserve the integrity of tile. Schlter-JOLLY are decorative profiles to finish and protect tiled external wall corners and other tiled edges, e.g. Our highly efficient wave shaped drain has been combined with a new drain adapter and an integrated waterproofing collar. The grate assembly accommodates a wide range of tile thicknesses and allows lateral and tilt adjustment as well. This series of shower drain grates features designs that fit into a virtually invisible frame, resulting in a stylish and truly seamless look for shower floors. For intermediate installation, use the supplied filling strip with peel-and-stick adhesive layer to make the channel support symmetrical. The true strength of these products is their focus on function, without ornamental accessories. The perimeter of the channel body consists of a bonding flange laminated with a collar made of KERDI. The award went to the combination of the KERDI-LINE-VARIO-H drain with the WAVE drainage profile. 1. Use the cutting gauge included in the set to quickly cut the profile to size with a handsaw to precisely match the conditions at the construction site. Schlter-QUADEC is a decorative profile made of coloured PVC for creating symmetrically angled external corners in tile coverings and finished edges of tiled skirtings and coverings. The wave shaped design achieves a high flow rate within the floor drain, which results in a self-cleaning effect. Drain body with built-in odour trap and efficient wave shaped drain. Complete the look with the drain grate that best suits your style. KERDI-BOARD is the ideal substrate for your tile shower! Clean the grates using common household cleaning agents. has leveling screws and had no issues just follow directions. Continuing Education for Architects & Designers. (More Info). The profile comes with two end caps and is available in brushed stainless steel V4A or powder coated aluminium with a textured TRENDLINE finish. Stainless steel surfaces develop a sheen when treated with a chrome-polishing agent. Regular cleaning maintains the neat appearance of stainless steel and reduces the risk of corrosion. No access to plumbing from below When there is no access to the plumbing from below, the channel body must be set and connected to the waste line simultaneously. Schlter-KERDI-LINE-VARIO COVE is a 120 cm cove-shaped drainage profile, which can be individually cut to size, for use with the Schlter-KERDI-LINE-VARIO-H drain. and for the latter, eight different TRENDLINE finishes. We will never sell or share your information. It is available with central, offset left, offset right or dual outlets equipped with an odour trap integrated into the drain body and is suitable for perimeter or intermediate installation. 2. The grates are installed in conjunction with a height adjustment collar or lateral adjustment ring, which are made of ABS to allow for simple and convenient adjustment when setting the tile. The tray is simply bonded to any even and level substrate, and its ready to tile. The dimensions work out to equal a height of 26mm at 1000mm long and 39mm at 2000mm long, offering a gradient/fall ratio of 1 in 80. Schlter-Systems has the perfect tool to help:Our drainage configuration tool automatically compiles a material list for your bathroom tiling project. drain adapter with integrated KERDI-FLEX collar. Floor drain with integrated bonding flange, Bonded waterproofing and vapor-retardant membrane, Waterproof, multifunctional tile substrate and building panel, Contact us: 888-472-4588 KERDI-LINE-STYLE grates are made of brushed stainless steel and come in three designs, PURE, FLORAL, and CURVE that fit into a very thin, virtually invisible frame. The bonding flange extends approximately 1" (2.5 cm) beyond the channel on all sides. Availability: Ships from Factory (More Info), Shipping: $49.95 Flat rate ground shipping for unlimited Schluter products in this order. When the Schluter KERDI LINE G3 Linear Drain is used in conjunction with the waterproofing systems Schluter KERDI 200 Membrane, Schluter DITRA 25 Matting, Schluter DITRA HEAT Matting or Schluter KERDI BOARD and the associated system sealing adhesives Schluter KERDI COLL L or Schluter KERDI FIX, this results in certified bonded waterproofing assemblies with a connected linear drainage. The adaptor ring replaces the clamping ring and is attached to the drain body using the clamping ring bolts. Design and functionality in a unique pairing: Schlter-ARCLINE is a profile system that matches the high-quality bathroom accessories of KEUCO. Some exclusions apply. The screed is then placed flush with the top of the bonding flange of the KERDI-LINE. Stainless steel grates exposed to the environment or aggressive substances should be cleaned periodically using a mild household cleaner. Send us an email: , Using a Prefabricated Shower Tray and Ramp, Adaptor kits are used when the clamping ring drain cannot be removed, Kit includes a stainless steel adaptor ring with an over-molded rubber gasket and a variety of perforated hole patterns that align with most common clamping ring shower drains, The adaptor ring replaces the clamping ring and is attached to the drain body using the clamping ring bolts, Connection is made watertight via the rubber gasket and KERDI-FIX adhesive/sealant, Suitable for both KERDI-SHOWER-T/-TS/-TT shower tray and mortar bed applications, Adaptor ring: Schluter-Systems L.P., U.S. patent No. The offset outlet is located 8" (20.3 cm) from the edge of the channel body and provides flexibility when obstacles (e.g., floor joists) are encountered during installation. The offset outlet is located 8" (20.3 cm) from the edge of the channel body and provides flexibility when obstacles (e.g., floor joists) are encountered during installation. Apply Schluter SET, Schluter ALL-SET, Schluter FAST-SET, or unmodified thin-set mortar to the substrate where the drain is to be placed with a notched trowel and solidly embed the channel support in the mortar. All cleaning agents must be free of hydrochloric and hydrofluoric acid. Measure and cut a section of pipe to connect the coupling to the odor trap below the floor, using the channel support as a spacer. Install the tray as per the instructions in the Schluter-Shower System Installation Handbook. Chippenham Our COVE and WAVE drainage profiles can be cut to size with millimetre precision. The bonding flange extends approximately 1" (2.5 cm) beyond the channel on all sides. When cut to 1000mm long this tray works perfectly with a 18mm timber floor and a Schluter DITRA HEAT DUO Installation. KERDI-LINE-STYLE grate designs are available in 20 to 48 (50 cm 120 cm) lengths with a 29/32 (23 mm) frame height which is able to accommodate to 11/16 (6mm 18 mm) covering thicknesses. Solidly embed the matting into the bond coat using a float, screed trowel, or DITRA-ROLLER. %%EOF Water and vapor penetrate through the grout joints (even sealed grout joints), mortar, and backing materials in shower walls and floors, allowing moisture to collect in the wall cavity or floor structure, which is the primary cause of mold growth. The polished stainless steel grates are available in 4" (100 mm) -square, 6" (150 mm) -square and -round versions. KERDI-LINE and the Schluter-Shower System offer an integrated moisture management solution that eliminates leaks and mold growth, and ensures the lasting beauty of your tiled shower. Note: Schluter-Systems strongly recommends a leak test be performed on the connection between the drain and waste line prior to continuing on with the remainder of the installation whenever possible. Of course, you can always resort to time-honoured classics as well:both drainage profiles are also available in brushed stainless steel V4A. Each style assembly is available in a brushed finish. The KERDI-DRAIN adaptor kits are designed to convert clamping ring drains by equipping them with an integrated bonding flange. in tiled skirtings. The membrane is adhered to the large integrated bonding flange to form a waterproof connection at the top of the drain assembly. KERDI-LINE consists of a formed stainless steel channel body and grate assembly or covering support to which tile is applied. All other grates are available in the 4" (100 mm) -square version only. The grate assembly can be adjusted to a wide range of tile thicknesses, while the covering support is placed flush with the channel body and can therefore accommodate any thickness covering. Refer to local plumbing and/or building codes for any specific requirements in your area. 2. D593,641, other patents pending. Learn more about the simplicity and versatility of Schlter-KERDI-LINE-VARIO in floor level showers! 500mm, 600mm, 700mm, 800mm, 900mm, 1000mm, 1100mm, 1200mm. All cleaning agents must be free of hydrochloric acid, hydrofluoric acid, and chlorides. The perimeter of the channel body consists of a bonding flange laminated with a collar made of KERDI. Waterproof, multifunctional tile substrate and building panel, Waterproofing strip seals abutting joints of membranes and building panels. It is intended to help keep setting material out of the channel body during installation. Align the bolt pattern of the clamping ring with the matching punch-outs in the adaptor ring. 1. Surface Cleaning & Application Ancillaries, Schlter Shower Trays, Drains & Accessories. With KERDI-LINE, the shower base can be sloped on a single plane, enabling the use of attractive large format tiles. However, in cases where the configuration of the shower does not allow for the use of the tray, KERDI-LINE can also be used in conjunction with a mortar base. Concrete Floor Grinders - Surface Preparation, Buffing, Polishing & Surface Preparation Tools, Extension Cords, Lights & Tool Accessories, Schluter KERDI-Line Linear Drain Channel Body, Schluter KERDI-FIX White Cartridge (290 ml), Available in lengths ranging from 20" (50 cm) to 72" (180 cm), Solid and perforated grates can be used with the KERDI-LINE-FC to create a seamless look in applications where multiple drains are installed end-to-end, Consists of a stainless steel adjustable frame for different thickness tile or stone covering 1/8" to 1" (3 mm to 25 mm) for standard grate assemblies and 1/4" to 23/32" (6 mm to 18 mm) for style grate assemblies, Covering support is placed flush with the top of the channel body and can therefore accommodate any thickness tile covering, Can be installed adjacent to walls or at intermediate locations in showers, wet rooms, and other applications that require waterproofing and drainage.